The Boatyard - Progress Photos:  Hull Bottom

UpProposed Sandusky FleetWeekender ProjectMy Crewboatsheds1

Weekender DetailsProgress JournalProgress PhotosExpense Log

ModificationsRelated InformationPVC Misadventures

laying_the_keel2.jpg (3525 bytes)hull_bottom1.jpg (2861 bytes)deck1.jpg (2060 bytes)bulkheads1.jpg (2717 bytes)

Assembly1.jpg (2602 bytes)steering_assembly1.jpg (3761 bytes)misc_photos1.jpg (2987 bytes)

Hull bottom pieces have been cut out, but not yet assembled.   Here you can see them roughly fitted to the keel.

Hull bottom rough fitted to the keel.
hull_bottom_with_stringers.jpg (35951 bytes) Here, the hull bottom has had the stringers attached, well, all except for the transom.
Here, the hull bottom has been attached to the keel, complete with bulkhead stringers. hull_bottom_mounted.jpg (48751 bytes)
The hull bottom is now firmly affixed to the keel. Relaxing after the power died on the drill.   Note, you can see the stringers for the cabin bulkhead have been divided to allow for the mast box.